Studer Innotec SA
next3
14 V 1.3 © Studer-Innotec SA next3 Tech manual
4.
Remove the external casing
5.
cut the strings maintaining the next 3 to the bottom of the casing.
6.
fix the 4 handles on the two sides of the next3 and remove the loops if you don’t need
them to move the next3.
7.
Fix the mounting plate on the wall, leaving enough space around the unit for the
ventilation and cabling. Don’t forget to put the fixing-belt in place before screwing the
mounting plate on the wall:
To Next Page
Loading...