Studer Innotec SA
next3
Technical user manual V1.3 © Studer-Innotec SA 15
In vehicles (road or marine), or when the support undergoes significant vibrations, the next3 is to be
mounted on anti-vibration elements. The fixing belt use is mandatory in those cases.
For the wall mounting plate, use the 5 screws and buffers capable to stand the weight of the inverter
in full safety.
When drilling the holes, keep at least 542 mm from the top screws to the ceiling to respect the 250mm
clearance above the device.
Keep at least 290mm to the nearest on the left wall (150mm+454mm/2-90mm=287mm) and 350mm
to the next next3 (120mm+454mm/2=347); distance from the middle of the plate.
Keep sufficient space below for the cabling.
Those are not provided in the package, select
the proper screws for your wall type and ensure
a solid mounting.
The diameter of the holes in the plate are
meant for 8mm screws.
To Next Page
Loading...