Sun Microsystems SPARCstation 10SX User Manual

180 SPARCstation 20 Service Manual • July 1996
FIGURE 11-44 OpenBoot PROM Orientation
NVRAM/TOD
To remove and install a NVRAM/TOD, proceed as follows.
Removing a NVRAM/TOD
1. Remove power from the system.
See “Removing Power from the System” on page 45.
2. Remove the cover and attach the wrist strap.
See Chapter 7.
Caution – Use proper ESD grounding techniques when handling components. Wear
an antistatic wrist strap and use an ESD-protected mat. Store ESD-sensitive
components in antistatic bags before placing it on any surface.
Socket notch
OpenBoot PROM notch

Sun Microsystems SPARCstation 10SX Specifications

General

Brand	Sun Microsystems
Model	SPARCstation 10SX
Category	Desktop
Language	English