Sun Microsystems SPARCstation 10SX User Manual

Chapter 5 Safety and Tools Requirements 43
■ When removing a board, card, or module from an antistatic bag, lay it on an
antistatic surface such as a Sun ESD mat, an antistatic bag, or a disposable
antistatic mat.
■ Transport boards, cards, or modules in an antistatic bag.
■ Always wear an antistatic wrist strap connected to a metal surface on the chassis
when working on system components and parts.
■ Do not place the boards, cards, or modules on an unprotected surface. Use a
cushioned antistatic mat or antistatic bag. Connectors and components have very
thin pins that bend easily.
■ Do not use an oscilloscope or VOM (Volt/Ohm meter) probe on the components.
The soldered pins can be damaged or shorted by the probe point.

Sun Microsystems SPARCstation 10SX Specifications

General

Brand	Sun Microsystems
Model	SPARCstation 10SX
Category	Desktop
Language	English