Chapter 5 Overview of the XSCF Shell 5-3
ping Checks the response for a host.
traceroute Displays the network path to the host by list.
settimezone Specifies the time zone.
showtimezone Displays the time zone setting.
setdate Sets the XSCF time.
showdate Displays the XSCF time.
setntp Configures the NTP server.
showntp Displays the SSH settings and fingerprint.
resetdateoffset Resets the time subtraction between the XSCF and the domain.
showdateoffset Displays the time subtraction between the XSCF and the domain.
setssh Configures SSH. Generates RSA and DSA keys for SSH2 host authentication.
showssh Displays the SSH settings and fingerprint.
settelnet Configures telnet.
showtelnet Displays the telnet settings.
setautologout Sets the session timeout time of the XSCF Shell.
showautologout Displays the session timeout time of the XSCF Shell.
setsmtp Configures the SMTP server.
showsmtp Displays the the SMTP server settings.
setemailreport Configures mail notification.
showemailreport Displays the mail notification settings.
setlookup Enables or disables the use of an LDAP server for authentication and user privilege
lookup.
showlookup Displays information about whether an LDAP server is used for authentication and
user privilege lookup.
setldap Configures LDAP client settings.
showldap Displays LDAP client settings.
sethttps Configures the https settings.
showhttps Displays the https settings.
TABLE 5-1 XSCF Commands (Continued)
Command Description
To Next Page
Loading...
Need help?
General
