5-4 SPARC Enterprise Mx000 Servers XSCF User’s Guide • August 2009
setupplatform • Sets up platform-specific settings.
Note: In the platform-specific settings, the following items can be optionally
configured. Each item is the same as the setting of Chapter 2.
• User Account settings
• XSCF Network Settings
• Internal DSCP Network
• Domain Name Service
• Network Time Protocol
• SSH
• HTTPS Server
• Email Reports
setarchiving Configures the log archiving function of XSCF.
showarchiving Displays the settings of the log archiving function of XSCF.
setaudit Configures the auditing of XSCF.
showaudit Displays the settings of the audit of XSCF.
viewaudit Displays the audit records (Audit trail) of XSCF.
setsnmp Configures the SNMP Agent.
showsnmp Displays the SNMP Agent settings.
setsnmpusm Configures the USM management information for the SNMP agent.
showsnmpusm Displays the USM management information for the SNMP agent.
setsnmpvacm Configures the VACM management information for the SNMP agent.
showsnmpvacm Displays the VACM management information for the SNMP agent.
setsunmc Start or stop the Sun Management Center agent and make changes to its
configuration.
showsunmc Show setup information and status of Sun Management Center agent.
setdcl Specifies the domain configuration information (DCL).
showdcl Displays the domain configuration information.
showboards Displays the component information and the COD information about a system
board.
showdevices Displays the domain information specified for a system board.
showdomainstatus Displays the domain status.
setupfru Specifies the number of XSB partitions of the system board and sets the memory
mirror mode.
TABLE 5-1 XSCF Commands (Continued)
Command Description
To Next Page
Loading...
Need help?
General
