vi SPARC Enterprise Mx000 Servers XSCF User’s Guide • August 2009
2.2.3 LDAP Administration 2–39
2.2.4 Time Administration 2–43
2.2.5 SSH/Telnet Administration 2–53
2.2.6 Https Administration 2–59
2.2.7 Audit Administration 2–67
2.2.8 Log Archiving Administration 2–74
2.2.9 SNMP Administration 2–79
2.2.10 Mail Administration 2–91
2.2.11 Domain Configuration 2–94
2.2.12 System Board Configuration 2–122
2.2.13 Domain Mode Configuration 2–125
2.2.14 Locale Administration 2–136
2.2.15 Altitude Administration 2–137
2.2.16 DVD Drive/Tape Drive Unit Administration 2–138
2.2.17 COD Administration 2–141
2.3 Save and Restore XSCF Configuration Information 2–145
3. Connecting to the XSCF and the Server 3–1
3.1 Connect Terminals to the XSCF 3–1
3.1.1 Terminal Operating Modes for Connection to XSCF 3–2
3.1.2 Port and Terminal Types Connected to the XSCF 3–3
3.1.3 About the XSCF-LAN/the DSCP Link Port Number and the
Function and the Firewall 3–5
3.1.4 Connecting to XSCF via the Serial Port 3–6
3.1.5 Connecting to XSCF Using SSH via the LAN Port 3–9
3.1.6 Connecting to XSCF Using Telnet via the LAN Port 3–10
3.1.7 Switching Between the XSCF Shell and the Domain Console 3–11
3.2 Types of XSCF Connections 3–12
3.2.1 Connecting XSCF via the XSCF-LAN Port Or the Serial Port 3–12
To Next Page
Loading...
Need help?
General
