Contents vii
3.2.2 XSCF-LAN and Serial Connection Purposes 3–16
4. Operation of the Server 4–1
4.1 Display Server Hardware Environment 4–1
4.1.1 Displaying System Information 4–1
4.1.2 Display Server Configuration/Status Information 4–6
4.2 Display Domain Information 4–8
4.2.1 Domain Information 4–9
4.3 Adding or Removing Domains 4–10
4.4 Server and Domain Power Operations 4–11
4.4.1 System Power On 4–12
4.4.2 System Power Off 4–13
4.4.3 Domain Power On 4–14
4.4.4 Domain Power Off 4–15
4.4.5 Sending a Domain Panic Request 4–17
4.4.6 Domain Reset 4–18
4.4.7 Sending a Break Signal to a Domain 4–19
4.4.8 Air-Conditioning Wait Time Administration 4–20
4.4.9 Warm-Up Time Administration 4–21
4.4.10 Shutdown Wait Time Administration 4–23
4.4.11 Dual Power Feed Administration 4–23
4.5 Identifying the Location of the System 4–25
4.6 Managing Fault Degradation 4–25
4.6.1 Displaying the Degraded Component 4–25
4.6.2 Clearing the Fault/Degradation Information 4–26
4.7 Changing the Time 4–27
4.8 Switching the XSCF Unit 4–27
4.9 Displaying State of an External I/O Expansion Unit and Administration
4–28
To Next Page
Loading...
