SunFounder ESP32 Starter Kit
2.16 Video 16: Mini Water Pump using ESP32 and L293D
This tutorial teaches how to control a 5V DC water pump with ESP32 and L293D motor driver:
• Water Pump Basics: Understand the functionality of a 5V DC water pump included in the SunFounder kit.
• Using L293D with ESP32: Learn how L293D motor driver helps in interfacing the water pump with ESP32.
• Project Setup: Step-by-step guidance on connecting the water pump to ESP32 using L293D.
• Arduino Programming: Detailed walkthrough of the Arduino code for controlling the water pump.
• Practical Demonstration: Experience the water pump in action, showing how to start and stop it using ESP32.
Video
Related On-line Tutorials
• 4.2 Pumping
2.17 Video 17: Controlling Servo Motor
Learn how to control a servo motor using ESP32 and a potentiometer in this comprehensive tutorial:
• Understanding Servo Motors: Introduction to micro servo motors, their types, and applications. The tutorial
focuses on the SG90 servo motor.
• Servo Motor Control: Detailed explanation of how to control the servo motor’s precise angles using ESP32.
• Hardware Setup: Instructions for setting up the servo motor with the ESP32 module and a potentiometer.
• Arduino Programming: The tutorial covers programming the ESP32 to control the servo motor, including
reading potentiometer values and mapping them to servo angles.
• Practical Demonstration: Observe the servo motor in action, showing how its position changes in response to
the potentiometer adjustments.
Video
Related On-line Tutorials
• 4.3 Swinging Servo
260 Chapter 2. Arduino Video Course
To Next Page
Loading...
Need help?
General