SunFounder ESP32 Starter Kit
Example
• 2.5 7 Segment Display (Arduino Project)
• 6.4 Digital Dice (Arduino Project)
• 2.5 Number Display (MicroPython Project)
• 6.6 Digital Dice (MicroPython Project)
5.13 I2C LCD1602
• GND: Ground
• VCC: Voltage supply, 5V.
• SDA: Serial data line. Connect to VCC through a pullup resistor.
• SCL: Serial clock line. Connect to VCC through a pullup resistor.
722 Chapter 5. Learn about the Components in Your Kit
To Next Page
Loading...