SunFounder ESP32 Starter Kit
4.5 2.2 Breathing LED
Now use another method to control the brightness of the LED. Unlike the previous project, here the brightness of the
LED is made to slowly diminish until it disappears.
When the sprite on the stage is clicked, the brightness of the LED slowly increases and then goes out instantly.
4.5.1 Required Components
In this project, we need the following components.
It’s definitely convenient to buy a whole kit, here’s the link:
Name ITEMS IN THIS KIT LINK
ESP32 Starter Kit 320+
You can also buy them separately from the links below.
476 Chapter 4. Play with Scratch
To Next Page
Loading...
Need help?
General