SunFounder ESP32 Starter Kit
Code
Note:
• Open the 2.4_microchip_74hc595.py file located in the esp32-starter-kit-main\micropython\codes
path, or copy and paste the code into Thonny. Then, click “Run Current Script” or press F5 to execute it.
• Make sure to select the “MicroPython (ESP32).COMxx” interpreter in the bottom right corner.
import machine
import time
# Initialize the pins for the 74HC595 shift register
sdi = machine.Pin(25, machine.Pin.OUT) # DS
(continues on next page)
322 Chapter 3. For MicroPython User
To Next Page
Loading...