Sungrow SH3K6 - Page 64

6 Electrical Connection User Manual
56
2. Lead the cable through the cable
gland.
3. Remove the cable jacket and strip
the wire insulation.
5 mm–8 mm
40 mm–50 mm
5 mm–8 mm
4. Plug the wires into DO terminals
without tool tightening.
5. Note:
6. For reconnection, press the part
as shown in the red circle so as to
pull out the cable.
DO1
COM1
NO1
DO2
COM2 NO2
7. Fasten the swivel nut and connect the other end of the cable to the
original edge of the AC contactor.