74
The distributor/installer who creates a plant for the end user needs to get the end user's e-
mail address. In configuring a plant, the e-mail address is required, and each e-mail address
can be registered only once.
step 1 The App screen will display the added inverter. Tap NEXT to configure the plant.
figure 7-11 Display the Added Inverter
step 2 Fill in the plant information. The fields marked with * must be filled in.
figure 7-12 Entering Plant Information
step 3 (Optional) Fill in the tariff information. The electricity price can be set to a specific value or
Time-of-Use tariff.
7 Commissioning User Manual
To Next Page
Loading...
