SUNWARD SWL3210 - Prevention of Electric Shock; Limits of the Machine

SWL Series Skid Steer Loader
17
• When it is necessary to park the machine on a slope, please follow the procedures
following:
1) Position the machine with the
bucket downward.
2) Lower the bucket and rotate it
forward to rest it on the ground.
3) Engage parking brake.
4) Stop the engine.
5) Put wedges under the wheels.
2.4.4 PREVENTION OF ELECTRIC
SHOCK
Voltage of Cables (kV)
1.0 6.6 33 66 154 275
Distance must be kept (m)
5.0 5.2 5.5 6.0 8.0 10.0
• Do not travel or operate the machine near the electrical cables. On the working sites
where the machine may go close to electrical cables, follow the procedures below.
Otherwise it is possible to get an electric shock, which may cause serious injury even
death.
• Before starting working near the electrical cables, consult the power company what is
the voltage with the cables and inform the power company of your coming work. If
necessary, ask them to take actions.
• To prepare for any possible emergencies, wear rubber shoes and gloves. Prepare all
things you need to call the power company immediately in case of accident.
• Even going close to the high-voltage cables can cause electric shock. Always maintain a
safe distance (see the table up) from the cables.
• Use a signalman to give warning if the machine approached too close to the electrical
cables.
• If the machine come too close to or entangled with the electrical cables, do not leave the
cabin and let any person approach the machine until the electricity has been shut off.
2.4.5 LIMITS OF THE MACHINE
• This machine has been designed for one operator. More than one passenger on the
machine can be extremely dangerous. Never transport more than one passenger with this
machine.