SWL Series Skid Steer Loader
21
Disconnect first the negative earth cable (-) and then the other positive cable (+).When
connecting, connect fist the positive cable (+) and then the negative earth cable (-).
If there is a welding operating on the machine, please disconnect the battery cables
before it.
2.5.7 PRECAUTION DURING INFLATING THE
TIRES
• Take into consideration that tires can burst while
being inflating. Inflate the tires bit by bit.
• For inflating the tires use an air-compressing gun
with extension and a gauge for control the pressure
in the tire.
• Do the maintenance of the tires like described in the relating item of this manual.
• Do not stand very close to the tire during inflating the tire and make sure that nobody
stands close.
• Follow the recommendation for the pressure given in the related item of this manual.
Make sure that the tire pressure is the same on both sides of the machine.