SUNWARD SWL3210 - Running the Engine During the Maintenance; Working under the Working Equipment and Machine; Safety Rules for High-Pressure Oil and Hose

SWL Series Skid Steer Loader
19
 To prevent pollution, never deposit the fuel, oil and grease directly onto the ground. Use
containers to keep the fuel, oil and grease and drain them according to the local
regulations.
2.5.2 RUNNING THE ENGINE DURING THE
MAINTENANCE
 If the maintenance must be carried out with engine
running. Two workers are necessary. One worker
must always seat in the operator’s seat and be
ready to stop the engine at any time.
 Keep the safety lock in function during the
maintenance operations.
 When the engine is running, don’t touch the
rotating parts. The rotating parts like fan and fan
belt are extremely dangerous because they can make you get caught. Be careful not to
come close to them.
2.5.3 WORKING UNDER THE WORKING EQUIPMENT AND MACHINE
 If it is necessary to carry out service and
maintenance under the working equipment or the
machine, support the equipment and machine with
block and stands strong enough to support the
weight of the working equipment and machine.
 Lower the working equipment to the ground or
the lowest position before working under the
machine.
2.5.4 SAFETY RULES FOR HIGH-PRESSURE OIL AND HOSE
 The hydraulic system is always under internal pressure. Before do any inspecting or
replacing hoses, always lower the working equipment and make sure that the pressure in
the hydraulic circuit has been released.
 The high-pressure oil leakage from small holes can penetrate your skin or injury your
eyes. Extreme care must be taken when you are inspecting high-pressure oil leakage.
Wear goggles and thick gloves. Use a piece of cardboard to check oil leakage instead of
your hands.
 Damaged hoses could be extremely dangerous and could cause serious injuries. Change
the damaged hoses and connections as soon as possible.
WRONG