EasyManua.ls Logo

SUNWARD SWL3210 - Page 81

SUNWARD SWL3210
89 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SWL Series Skid Steer Loader
80
Trouble
Cause
Solution
tend to be black
• Faulty injectors
• Change
• Faulty compression • Adjust valve clearance
Combustion noise
occasionally resembles a
blow
• Faulty injectors • Change
Abnormal noises (during
combustion or in mechanical
parts)
•
Fuel with low cetane
rating
• Change with correct
fuel
• Overheating •
•
Exhaust silencer
inside damaged
• Change
•
Excessive valve
clearance
• Adjust valve clearance
Transmission system
Machine moves neither
forward nor reverse
• Oil level insufficient • Refill
• Suction filter clogged • Change
• Faulty flexible coupler • Change coupler
• Max. pressure valves
faulty or dirty
• Clean or change valves
• Positioning hydraulic
connection interrupted
• Restore connection
• Travel motor faulty • Repair or change
Machine moves with delay
(with abnormal noise)
•
Oil level too low
•
Refill
• Presence of foam •
Use the recommended
oil
• Suction pipe tightness •
Check and eliminate
leakage
• Suction filter clogged • Change
• Travel motor faulty • Repair or change
Traction force in the two
travel directions is
insufficient
•
Endothermic engine
does not reach max. speed
•
Change diesel oil filter
and check injection pump
•
Auxiliary fuel pump
(gear pump) faulty
• Repair or change
•
Max. pressure valve
setting incorrect
• Reset
•
Connection to servo
control faulty or lever angle
incorrect
•
Restore connection or
shift lever to correct position
•
Pressure relief valve
setting incorrect
• Reset

Table of Contents