ENGINE 3-71
• Install the snap ring
2.
GEARSHIFT SHAFT/GEARSHIFT ARM
DISASSEMBLY
• Remove the following parts from the gearshift shaft/gearshift
arm.
1 Washer
5 Washer
2 Snap ring
6 Plate return spring
3 Gearshift shaft return spring
7 Gearshift cam drive plate
4 Snap ring
INSPECTION
Check the gearshift shaft/gearshift arm for wear or bend.
Check the return springs for damage or fatigue.
REASSEMBLY
• Install the following parts to the gearshift shaft/gearshift arm
as shown in the right illustration.
1 Washer
5 Washer
2 Snap ring
6 Plate return spring
3 Gearshift shaft return spring
7 Gearshift cam drive plate
4 Snap ring
NOTE:
When installing the gearshift shaft return spring
3
, position the
stopper
B
of the gearshift arm between the shaft return spring
ends
A
.
PartShark.com
877-999-5686
To Next Page
Loading...
