PERIODIC MAINTENANCE 2-17
CLUTCH
• Loosen the lock-nut
1 and turn the adjuster
2 all the way
into the clutch lever assembly.
• Remove the engine sprocket cover.
• Loosen the lock-nut
3 and turn out the adjusting screw
4
two or three rotations.
• From that position, slowly turn the adjuster screw
3 in until it
stops.
• Turn the adjuster screw
3 out 1/4 rotation, and tighten the
lock-nut
4.
• Loosen the lock-nuts
5, turn the cable adjuster
6 to obtain
10 – 15 mm (0.4 – 0.6 in) of free play
A at the clutch lever
end.
• Tighten the lock-nuts
5.
% Clutch cable play
A: 10 – 15 mm (0.4 – 0.6 in)
Clutch release screw: 1/4 turns back.
Inspect every 6 000 km (4 000 miles, 12 months).
PartShark.com
877-999-5686
To Next Page
Loading...
