7-66 CHASSIS
• Remove the brake lever
3 and brake switch
4.
• Pull out the dust boot
5 and remove the snap ring
6.
• Remove the piston and return spring.
7 Piston
8 Secondary cup
9 Primary cup
0 Return spring
MASTER CYLINDER INSPECTION
Inspect the master cylinder bore for any scratches or other dam-
age.
Inspect the piston surface for any scratches or other damage.
Inspect the primary cup, secondary cup and dust seal for wear
or damage.
PartShark.com
877-999-5686
To Next Page
Loading...
