CHASSIS 7-27
REMOVAL
HANDLEBARS
• Remove the handlebar balancers
1.
• Remove the rear view mirrors
2.
NOTE:
Do not remove the handlebar balancer mounting screw before
removing the handlebar balancer. Slightly loosen the mounting
screw, and then pull the balancer assembly out of handlebars.
• Remove the front brake master cylinder
3.
• Remove the right handlebar switch box
4 and throttle case
5.
• Disconnect the clutch switch lead wire coupler
6.
• Remove the left handlebar switch box
7.
• Remove the grip rubber
8.
• Loosen the clutch lever holder bolt
9.
• Disconnect the clamps
0.
• Remove the clamp bolt caps
A.
PartShark.com
877-999-5686