THROTTLE VALVE SYNCHRONIZATION
USE OF SDS TOOL
Check and adjust the throttle valve synchronization between two
cylinders.
Step 1
• Lift and support the fuel tank. (!DL650K4 5-7)
• Remove the rubber caps 1 from each vacuum nipple on the
throttle body.
• Connect the vacuum tester hoses 2 to each vacuum nipple.
Step 2
• Connect a tachometer.
• Set up the SDS tool.
• Click “Data monitor”.
• Warm up the engine (Water temp. more than 80 °C (176 °F)).
DL650K7/AK7 (’07-MODEL) 13-61
PartShark.com
877-999-5686
To Next Page
Loading...
