10-6 EMISSION CONTROL INFORMATION
(FOR E-33: K7)
PAIR (AIR SUPPLY) SYSTEM INSPECTION
HOSES
• Inspect the hoses for wear or damage.
• Inspect that the hoses are securely connected.
PAIR REED VALVE
• Remove the PAIR reed valve cover. (3-36)
• Inspect the reed valve for the carbon deposit.
• If the carbon deposit is found in the reed valve, replace the
PAIR reed valve with a new one
• Installation is in the reverse order of removal.
1 IAP sensor
7 Fuel shut-off valve
2 Vacuum hose
8 EVAP canister
3 No.2 Throttle body
A HC VAPOR
4 No.1 Throttle body
B FRESH AIR
5 Purge hose
C VACUUM
6 Surge hose
PartShark.com
877-999-5686
To Next Page
Loading...
