7-80 CHASSIS
VALVE
• Inspect the valve after the tire is removed from the rim.
Replace the valve with a new one if the seal rubber is peeling
or has damage.
• Inspect the valve core. If the seal
1 has abnormal deforma-
tion, replace the valve with a new one.
VALVE INSTALLATION
• Any dust or rust around the valve hole
1 must be cleaned off.
Then install the valve in the rim.
NOTE:
To properly install the valve into the valve hole, apply a special
tire lubricant or neutral soapy liquid to the valve.
#
A Wheel
B Valve lip
C Valve
Be careful not to damage the lip of valve.
PartShark.com
877-999-5686
To Next Page
Loading...
