7-50 CHASSIS
REMOVAL
• Remove the exhaust pipe and exhaust muffler. ("3-6)
• Raise the rear wheel off the ground and support the motorcy-
cle with a jack or wooden block.
• Remove the rear wheel. ("7-36)
• Remove the rear brake hose guides
1.
• Remove the cushion rods
2.
• Remove the shock absorber lower mounting bolt
3.
• Remove the cushion lever
4.
• Remove the swingarm pivot shaft lock-nut with the special
tool.
$ 09940-14940: Swingarm pivot thrust adjuster socket
wrench
• Hold the swingarm pivot shaft
5 and remove the swingarm
pivot nut
6.
• Remove the swingarm pivot shaft with the special tool.
$ 09944-28320: Hexagon bit 19 mm
• Remove the chain cover
7.
PartShark.com
877-999-5686