COOLING AND LUBRICATION SYSTEM 6-17
OIL SEAL
Visually inspect the oil seal for damage, with particular attention
given to the lip.
Replace the oil seal that shows indications of oil leakage.
BEARING CASE
Visually inspect the bearing case for damage.
Replace the water pump body if necessary.
REASSEMBLY AND INSTALLATION
• Install the oil seal with the special tool.
& 09913-70210: Bearing installer set () 22 mm)
NOTE:
The stamped mark on the oil seal faces impeller side.
• Apply a small quantity of the SUZUKI SUPER GREASE to the
oil seal lip.
* 99000-25030: SUZUKI SUPER GREASE “A” (USA)
99000-25010: SUZUKI SUPER GREASE “A” (Others)
PartShark.com
877-999-5686
To Next Page
Loading...
