5-18 FUEL SYSTEM AND THROTTLE BODY
THROTTLE BODY DISASSEMBLY
"
• Remove the IAP sensor vacuum damper and its hose.
• Disconnect the fuel feed hose
1.
• Remove the throttle link rod
2 and secondary throttle link rod
3.
NOTE:
The throttle link rod
2
is longer than the secondary throttle link
rod
3
.
• Remove the fuel delivery pipe
4.
• Remove the fuel injectors.
* Be careful not to damage the throttle lever when dis-
assembling the throttle body.
* The throttle body is assembled precisely in factory.
Do not disassemble it other than shown in this man-
ual.
PartShark.com
877-999-5686
To Next Page
Loading...
