3-82 ENGINE
ENGINE REASSEMBLY
Reassemble the engine in the reverse order of disassembly.
The following steps require special attention or precautionary
measures should be taken.
NOTE:
Apply engine oil to each running and sliding part before reas-
sembling.
ENGINE BOTTOM SIDE
TRANSMISSION
• Install the countershaft assembly
1 and the driveshaft
assembly
2 to the left crankcase half.
• Install the washer
3 onto the driveshaft assembly
2.
GEARSHIFT
• Install the gearshift forks
1/
2/
3, gearshift cam
4 and gear-
shift fork shafts
5.
NOTE:
Identify the gearshift forks as follows.
1 For 5th driven gear
2 For 6th driven gear
3 For 3rd/4th drive gear
1 For 5th driven gear
2 For 6th driven gear
3 For 3rd/4th drive gear
35
15
10
10
35 31
PartShark.com
877-999-5686