“C41” (P0230) FP RELAY CIRCUIT MALFUNCTION
On model K7, the connector terminals to be used for checking
sensors for voltage, resistance or continuity at the ECM terminal
are located as shown in the illustration.
* Refer to the DL650 service manual 4-44 for details.
“C42” (P01650) IG SWITCH CIRCUIT MALFUNCTION
* Refer to the DL650 service manual 8-39 for details.
ECM coupler (Harness side)
DL650K7/AK7 (’07-MODEL) 13-39
PartShark.com
877-999-5686
To Next Page
Loading...
