ENGINE 3-5
• Remove the gearshift lever
1.
• Remove the engine sprocket cover
2.
• Remove the clutch release assembly
3, its support plate
4
and spring
5.
• Remove the clutch push rod
6.
• Remove the clutch cable from the generator cover.
NOTE:
If it is necessary to replace the clutch cable or clutch release
lever, pry up and bend down the stopper
A
of the clutch release
lever.
• Flatten the lock washer.
• Remove the engine sprocket nut
7 and lock washer while
depressing the brake pedal.
PartShark.com
877-999-5686
To Next Page
Loading...
