Suzuki DL650K5 - Page 79

ENGINE 3-25
REAR CYLINDER HEAD
• Remove the cylinder head bolt (M6)

1.
• Remove the cylinder bolts (M6)

2.
• Remove the cylinder head bolts

3 and washers.
NOTE:
When loosening the cylinder head bolts, loosen each bolt little
by little diagonally.
• Remove the cylinder head

4.
• Remove the cylinder head gasket

5, dowel pins

6 and cam
chain guide

7.
REAR CYLINDER
• Remove the cylinder nuts

1 and clamp.
• Remove the cylinder

2.
• Remove the cylinder base gasket

3 and dowel pins

4.
NOTE:
Make sure that the oil jet

5
is inserted in the crankcase.
PartShark.com
877-999-5686