Suzuki LT-A50 - Page 93

5-22 CHASSIS
• Tighten the front suspension arm bolts to the specified torque.
! Front suspension arm bolt: 50 N
.
m (5.0 kgf
.
m, 36 lb-ft)
• Tighten the front shock absorber upper bolt to the specified
torque.
! Front shock absorber upper bolt: 29 N
.
m
(2.9 kgf
.
m, 21lb-ft)
• Tighten the tie-rod end nut to the specified torque and install a
new cotter pin.
! Tie-rod end nut: 29 N
.
m (2.9 kgf
.
m, 21 lb-ft)
• Install the front brake. ("5-9)
• Install the front wheel. ("5-4)
After installing the front brake and front suspension, adjust the
following items.
* Front brake lever play. ("2-10)
* TOE-IN adjustment. ("5-23)