Suzuki RMX450Z - Page 305

Front Suspension: 2B-6
17) Separate the inner tube (11) out of the outer tube.
18) Remove the slide bushing (12) from the inner tube
(11).
19) Remove the following parts from the inner tube (11)
• Guide bushing (13)
• Seal retainer (14)
• Oil seal (15)
• Stopper ring (16)
• Dust seal (17)
20) Clamp the bottom (flat part) “B” on the sub-tank with
a vise.
CAUTION
!
Do not clamp the sub-tank too tight.
21) Loosen the compression damper unit (18).
22) Remove the compression damper unit (18) from the
sub-tank (6).
NOTE
Slowly compress the inner rod (19) unit it
stops so that the compression damper unit
can be removed easily.
23) Drain the fork oil from the damper rod assembly.
11
IA02J1220016-01
12
11
IA02J1220020-01
13 14 15 16 17
11
IA02J1220021-01
“B”
18
IA02J1220022-02
19
6
18
IA02J1220023-01
IA02J1220024-01