4-2 SHAFT DRIVE
*A
SECONDARY BEVEL GEARS
CONSTRUCTION
1 Bush
2 Overdriving driven gear
3 Circlip
4 Output cam dog
5 Damper spring
6 Secondary bevel gear set
7 Shims (5 kinds)
8 Driven bevel gear bearing
9 O-ring
0 Shims (5 kinds)
A O-ring
B Oil seal housing
C Oil seal
D Bearing stopper
E Universal joint
*A
Do not disassemble the secondary driven gear.
A Secondary drive gear shaft nut
B Secondary drive bevel gear
bearing retainer bolt
C Secondary driven bevel gear
bolt
ITEM N
.
m kgf
.
m lb-ft
A 105 10.5 76.0
B, C 23 2.3 16.5
!
To Next Page
Loading...
