Suzuki VL800 - Ignition System and Engine Stall Checks

SHAFT DRIVE 4-3
Backlash
0.05 – 0.32 mm
(0.002 – 0.013 in)
Adjust backlash by selecting shims.
(Use two pieces of shims.)
Shim 1 size table
Part number Thickness
24945-05A-0A0 0.30 mm (0.012 in)
24945-05A-0B0 0.35 mm (0.014 in)
24945-05A-0C0 0.40 mm (0.016 in)
24945-05A-0D0 0.50 mm (0.020 in)
24945-05A-0E0 0.60 mm (0.024 in)
The shims 1 are available as a set (24945-05810).
Shim 2 size table
Part number Thickness
24935-38A01-030 0.30 mm (0.012 in)
24935-38A01-035 0.35 mm (0.014 in)
24935-38A01-040 0.40 mm (0.016 in)
24935-38A01-050 0.50 mm (0.020 in)
24935-38A01-060 0.60 mm (0.024 in)
The shims 2 are available as a set (24935-38810).
Standard clearance A: 1.00 mm (0.039 in)
B: 1.00 mm (0.039 in)