5-6 FUEL AND LUBRICATION SYSTEM
10 N
.
m (1 0 kgf m, 7.0 lb-ft)
Fuel tank
FUEL PUMP
REMOVAL
• Remove the battery 1.
• Disconnect the lead wire coupler 2.
• Remove the ignitor 3.
• Disconnect the fuse case coupler 4.
• Remove the starter lead wire 5.
• Remove the battery case.
• Remove the fuel pump mounting bolts.
!
* Gasket 3 must be replaced with new ones to prevent
fuel leakage.
* Tighten the fuel level gauge bolts evenly.
NOTE:
Face
mark
A
on the fuel level gauge forward.
To Next Page
Loading...
