FUEL AND LUBRICATION SYSTEM 5-7
INSPECTION
!
Gasoline is highly flammable and explosive. Keep heat,
sparks, and flames away from gasoline.
• Disconnect the fuel hose 1, connect the suitable hose and
insert the free end of the hose into a receptacle.
Check the fuel flow when cranking the engine for few seconds by
pressing the starter button.
If the fuel flow is not found, check the fuel valve. ("5-5)
If the fuel valve and hoses are not fault, replace the fuel pump.
REASSEMBLY
Carry out the assembly procedure in the reverse order of disas-
sembly.
• Connect the fuel hoses 1, 2 and vacuum hose 3 securely.
• Tighten the bolts A
FUEL HOSE ROUTING: "9-17
Fuel hose 1 (To carburetor)
Fuel hose 2 (To fuel valve)
Vacuum hose 3 (To intake pipe)
• Disconnect the fuel hoses 1, 2 and vacuum hose 3.
To Next Page
Loading...
