CHASSIS 7-55
NOTE:
To install the final gear case easily, move the dust boot front and
the universal joint back. Engage the universal joint to the propel-
ler shaft first and then engage it to the secondary driven bevel
gear shaft.
• Tighten the final gear case mounting nuts to the specified torque.
$ Final gear case mounting nut: 40 N
.
m
(4.0 kgf m 29.0 lb-ft)
• Install the rear wheel. ('7-41)
• Install the exhaust pipes and mufflers. ('3-5)
To Next Page
Loading...
