Suzuki VL800 - Page 430

14-78 VL800K5 (’05-MODEL)
“C31” (P0705) GP SWITCH CIRCUIT MALFUNCTION
INSPECTION
Step 1
1) Remove the left frame cover. ($7-2)
2) Remove the secondary gear case cover 1.
3)
Turn the ignition switch OFF.
4) Check the GP switch coupler for loose or poor contacts.
If OK, then measure the GP switch voltage.
DETECTED CONDITION POSSIBLE CAUSE
No Gear Position switch voltage.
Switch voltage is not within the following range.
Switch voltage > 0.6 V
• Gear Position switch circuit open or short.
• Gear Position switch malfunction.
• ECM malfunction.
ECM
N
GP SWITCH
Neutral indi tor
light
To engine stop switch
Side-stand relay
Ignition
switch
Side stand switch
5
4
3
2
1
GP
B/W
PP
Bl
1
1