14-110 VL800K5 (’05-MODEL)
THROTTLE BODY INSTALLATION
Installation is in the reverse order of removal. Pay attention to
the following points:
• Connect the TP sensor lead wire coupler
1.
#
• Connect the throttle pulling cable
2 and throttle returning
cable
3 to the throttle cable drum.
• Adjust the throttle cable play. ($2-11)
TP sensor lead wire coupler and STP sensor lead wire
coupler resemble each other very closely in external
appearance.
Make sure to check the color of coupler before install-
ing.
TP sensor lead wire coupler: Black color
STP sensor lead wire coupler: Green color
To Next Page
Loading...
