Suzuki VL800 - Hill Climbing and Descending; Stopping, Parking, and Passengers

3-16 ENGINE
• Remove the primary driven gear assembly and the oil pump
drive chain.
• Remove the thrust washer 1 and spacer 2.
OIL PUMP
• Remove the oil pump by removing the circlip.
% 09900-06107: Snap ring pliers
• Remove the pin 1 and washer 2.
GEARSHIFT
• Draw out the gearshift shaft 1.
• Remove the cam guide and the pawl lifter.
• Remove the cam driven gear assembly by removing the gear-
shift cam stopper bolt 2.