VL800/C/TK9 (’09-MODEL) 18-49
• Before installing the straight joint 7, clean its inside and out-
side.
• Apply thin coat of the engine oil to the O-rings.
• Insert both the straight joint 7 and straight plug 8 straightly
into the delivery pipe.
• Tighten the straight plug mounting screw to the specif ed
torque.
Straight plug mounting screw: 5 N·m (0.5 kgf-m 3.5 lbf-ft)
Replace the O-rings with the new ones.
To Next Page
Loading...
