18-48 VL800/C/TK9 (’09-MODEL)
• Apply thin coat of engine oil to the new O-rings and cushion
seals.
• Install the fuel injector 4 by pushing it straight to the delivery
pipe 5.
NOTE:
Align the coupler E of the injector with the groove F of the
delivery pipe.
• Install the fuel delivery pipes 6 to the throttle body.
• Tighten the fuel delivery pipe mounting screws to he speci-
fied torque.
Fuel delivery pipe mounting screw:
3.5 N·m (0.35 kgf-m, 2.5 lbf-ft)
Replace the O-rings and cushion seals with the new
ones.
Never turn the injector while pushing it.
Never turn the fuel injectors while installing them.
To Next Page
Loading...
