Removing and replacing
appliance hardware
components
This chapter includes the following topics:
■ Overview
■ Removing and replacing the bezel
■ Removing and replacing NetBackup 5230 disk drives
■ Removing and installing a NetBackup 5030 or NetBackup 5230 power supply
■ Removing and replacing NetBackup 5220 Appliance storage drives
■ Removing and replacing a NetBackup 5220 Appliance power supply
Overview
This chapter provides information that describes how to remove and replace faulty
components from NetBackup appliance. Some components are hot-swappable.
Care must be taken to ensure that hot-swappable components are in a safe state
before they are removed. Inappropriate removal of a hot-swappable component
can disrupt system operation and result in data loss and data corruption. Contact
Symantec Technical Support immediately if a component is removed inappropriately
or the replacement part does not resolve the fault.
When handling electrical components, be sure to always apply appropriate ESD
preventative measures. Do the following:
9
Chapter
To Next Page
Loading...
