Symantec NetBackup 5220 - Chapter 10 Removing and Replacing Symantec Storage Shelf Hardware; About Customer-Replaceable Hardware in the Symantec Storage Shelf

Removing and replacing
Symantec Storage Shelf
hardware
This chapter includes the following topics:
■ About customer-replaceable hardware in the Symantec Storage Shelf
■ Removing and replacing disk drives
■ Removing and replacing a storage shelf power supply
■ Removing and replacing an I/O module
About customer-replaceable hardware in the
Symantec Storage Shelf
The modular design of the Symantec Storage Shelf facilitates troubleshooting and
minimizes downtime. Whenever a hardware fault is detected, the fault can be
isolated to a component. The component can easily be replaced with a
customer-replaceable unit (CRU). Replaceable components in the NetBackup
storage shelf include the following:
■ Disk drives
■ Power supplies
■ I/O modules
Faults can be identified and located using Symantec software. The hardware monitor
feature in the NetBackup management software provides graphical status for
significant hardware components in the storage system. The Call Home feature
10
Chapter