/log/dna/sample.name.symantec.com.NBDNA.20100907.191711.zip
Archive created successfully!
Return /log/dna/sample.name.symantec.com.NBDNA.20100907.191711.zip
to Symantec Support upon request.
NetBackup Support Utility (nbsu)
You can use the nbsu utility to gather appropriate diagnostic information about
NetBackup and the operating system. The Symantec NetBackup Troubleshooting
Guide describes when you would use this utility, as well as how to run it.
See “Tools for troubleshooting the NetBackup Appliance” on page 30.
About changing VxAT properties
When troubleshooting your appliance, you may need to configure the Symantec
Product Authentication Service (AT) Server parameters. You can update these
parameters using the changeVxATProperties script.
Enter the following command to configure the AT parameters on UNIX:
/opt/SYMCOpsCenterServer/bin/changeVxATProperties.sh
The changeVxATProperties script prompts you to enter the following details:
■ Authentication Service Host Name
■ Authentication Service Port Number
■ Authentication Service Domain Name
■ Authentication Service Domain Name
■ Authentication Service Password
See “Tools for troubleshooting the NetBackup Appliance” on page 30.
38About Software Troubleshooting Tools
About changing VxAT properties
To Next Page
Loading...
