Troubleshooting Hardware
Issues
This chapter includes the following topics:
■ Starting an appliance that does not turn on
■ Troubleshooting an amber drive status LED on the appliance
■ Troubleshooting a system drive that the management software does not identify
■ Troubleshooting appliance power supply problems
■ Troubleshooting system-induced shutdown
■ Troubleshooting system status LED issues
Starting an appliance that does not turn on
This section provides suggestions you can use to ensure that the appliance is on.
Possible causes include the following:
■ The AC power plug is not inserted properly.
■ AC power is not supplied from the power source.
■ Appliance is not turned on.
To ensure that the power is on, do the following
1
Check the AC power LED and the system status LED on the control panel.
■ If the AC power LED is off and the system status LED is green, push the
AC power button to turn on the power.
8
Chapter
To Next Page
Loading...
