■ To move the .pfx files into a local directory on a remote computer, create
and mount a mount point and then move the files as follows:
This example assumes that the Windows system uses Samba.
■ Create and mount a mount point as follows:
net use <AnAvailableDriveLetter>:
\\<appliance-host>\"incoming patches"
■ Create and mount a mount point as follows:
net use <AnAvailableDriveLetter>:
\\<appliance-host>\"incoming_patches"
■ Copy the .pfx file as follows:
# copy /inst/patch/incoming/*.pfx
/mnt/<computer_name>
Windows
This example assumes that the UNIX or Linux system uses
NFS.
■ Create and mount a mount point as follows:
# mkdir -p /mnt/<computer_name>
# mount -t nfs <computer_name>:/<share_name>
/mnt/<computer_name>
■ Copy the .pfx file as follows:
# cp /inst/patch/incoming/*.pfx
/mnt/<computer_name>
UNIX or Linux
2
Insert the USB drive into an appliance USB port on the media server appliance
that you want to reimage.
145Disaster Recovery
Disaster recovery scenarios
To Next Page
Loading...
