Symmetricom TimeProvider 500 series Reference Guide

Issue 2: Sep 99 TMSL 097-44018-26
Page 107
COMMAND CODE: RTRV-LOG (Contd)
RESPONSE FORMAT
<sid> <date> <time>
M <ctag> COMPLD
"LOG"
/*
"<date> <time> "
"<sid>:<ocrdat> <ocrtm> <aid>:<ntfcncde>,<condtype>,<srv-
eff>:
/* <conddescr> */" ...
"<sid>:<ocrdat> <ocrtm> <aid>:<condtype>,<condeff>:
/* <conddescr> */" ...
*/
;
Notes:
1. The line shown as "<date> <time> " in the response format will show an arbitrary date and time when
the RTRV-LOG command is used without having ever used the INIT-LOG command. After the INIT-
LOG command has been used, that line will appear as follows:
"<date> <time> INIT-LOG:::<ctag>::LOG"
where the date and time shown are the date and time when the INIT-LOG command was entered.
2. The next-to-the-last line in the response format (begins with "<sid>) is the format for an alarm in the
log.
3. The last line in the response format (also begins with "<sid>) is the format for an event in the log.

Symmetricom TimeProvider 500 series Specifications

General

Brand	Symmetricom
Model	TimeProvider 500 series
Category	Data Loggers
Language	English